Valves are technically valves fittings, but are usually discussed as a separate category.
Home » Instrumentation » Valves » Needle & Regulator Valves
V15
V16
VB16
VR6
V46A
VEX110
Working Pressure : 5,000psig
Regulating/Vee/Non-Rotating Soft Seat
Panel Mounting is available
Stainless Steel, Brass, and Exotic Alloys
DK-Lok 1/8 to 3/4 in. OD
Pipe thread 1/8 to 1/2 in
Designed for a wide range of general purpose in gas and liquid applications
Forged Body with Inline and Angle pattern
Integral Bonnet design to eliminate inadvertent stem back-out
Standard metal seal for pressure tightness at elevated temperatures
Standard PTFE packing, and optional PEEK packing for higher temperature service
Packing nut allows external packing adjustment to ensure leak-free packing on stem
Non-rotating globe stem tip
Stainless Steel and Exotic Alloys
DK-Lok 1/4 to 1 in. OD
Pipe thread 1/8 to 1 in.
Pipe socket weld 1/4 to 1/2 in.
Tube socket weld 1/4 to 3/4 in.
Standard 316 stainless steel, optional Alloy 400, and Alloy C276 construction.
Valve stem back seating against the bevelled edge of bonnet in fully open position prevents maximum leakage through bonnet when packing fails.
Standard non-rotating stem disc and stem packing below the threads design.
Working Pressure : 6,000psig
Compact design
Vee Tip / Soft Seat Stainless Steel
DK-Lok 1/4 to 1/2 in. OD
Pipe thread 1/4 to 3/4 in.
Two-piece chevron PFA stem packing design with
compensating spring packing.
Improves sealing integrity.
High pressure valve but with compact design.
Working Pressure : 6,000 psig
PCTFE Seat Material
Stainless Steel
Pipe thread Female NPT 1/4 in.
The High Pressure Regulator valve is featured by controlling the pressure toward downstream from zero to 1,000 psig (68.9 barg) precisely and keeping the downstream pressure constantly after adjusting, though the upstream pressure may be fluctuated unexpectedly.
The diaphragm made of thin plate of stainless steel is positioned between the body and housing to make sure of stable sealing characteristics and keep the control volume.
Working Pressure : 10,000 psig
Packing adjustment externally
Stainless Steel and Carbon Steel
DK-Lok 1/4 to 1/2 in. OD
Pipe thread 1/4 to 3/4 in.
Chevron PTFE packing provides far improved sealing integrity.
Packing below the stem threads is to isolate threads from system fluid and lubricant washout.
Non-rotating stem tip closure for long-life and leak-tight shut-off.
Lock plate ensures the valve fastened to the body.
Working Pressure : 10,000 psig
Unique sealing cup design on packing
Stainless Steel
Pipe thread 1/4 to 1/2 in.
Unique pressure reacting sealing system eliminates the need of packing adjustment.
Sealing cup swells up in system pressure for leak-tight operation.
Backseat stem design prevents stem blowout.
Stem packing below the threads prevents thread lubricant washout and media contamination.